Planer sander BFG700K-R-RPA is a woodworking equipment for cutting and sanding, which is good for heavy calibration of glued panels, solid wood panels or bamboo panels where we are needing to remove over 2 mm of material and finishing sanding at grit 180 in a single pass.
The Planer Sander BFG700K-R-RPA is a robust woodworking machine engineered for heavy stock removal and precision sanding. This model is ideal for glued panels, solid wood boards, and bamboo boards requiring both calibration and fine sanding in one pass.
This planer sander features three working units: a planer knife head for deep material removal, a steel calibrating roller for rough sanding, and a combination head consisting of a rubber roller and sanding pad for fine surface finishing.
Equipped with safety devices before and after the working units, including anti-kickback fingers, one-direction press rollers, and segmented press shoes, the BFG700K-R-RPA ensures stable feeding and consistent processing quality.
MODEL SPC ITEM | BFG700K-R-RPA |
Working width | 50-700 mm |
Working thickness | 10-140 mm |
Working table height | 900 mm |
Working length | Min 390 mm |
Planer roller diameter | 125 mm |
Planer knife size | 30*12*2.5mm/114PCS |
1st sanding roller diameter | 190 mm |
2nd sanding roller diameter | 115 mm |
1st belt speed | 21 m/s |
2nd belt speed | 14 m/s |
Feeding speed | 0-19m/min (inverter) |
Abrasive belt size | 730*1900mm |
Feeding belt size | 705*4830mm |
Total motor power | 41.43kw |
Planer motor power | 15kw-2P |
1st belt motor power | 15kw-4P |
2nd belt motor power | 7.5kw -4P |
Feeding motor power | 3kw(inverter) |
Rise and decline motor power | 0.75kw-4P |
Brush motor power | 0.18kw-4P |
Working pressure | 0.4-0.8 Mpa |
Compressed air consumption | 1cbm/min |
Average speed of sucked air | Min. 30m/s |
Overall dimension | 2600*1270*1930mm |
N.W. | 3050kgs |
